The Grundfos Hydro MPC booster systems are made to the very highest standards. Thanks to the CU 352 controller, they handle even the most difficult boosting jobs with ease and accuracy. Grundfos Hydro MPC booster systems can be used wherever additional pressure is required. The intelligent cascade control ensures that the optimum number of pumps required to meet the demand runs at any time. Together with the CR with IE3 motors, this makes the Hydro MPC the most energy-efficient solution for maintaining a constant pressure during changing flow demands.
An innovative pressure booster system specially designed for building service applications.
Hydro Multi-E is built on the well-known CRE and CME pumps, with IE3 motors and below 2.2 kW permanent magnet motors known for their extremely high efficiency and reliability.
The micro frequency-controlled (speed-controlled) motors provide unique control functionality increasing the comfort of the user and decreasing operating costs. The set point is easily adjusted from the control panel or from Grundfos GO.
The system is available with 2-4 pumps of CR(I)E or 2-3 pumps of CME.
Drehzahlgeregelte Einzelpumpenanlagen für die Trinkwasserdruckerhöhung in Kleinobjekten (Trinkwasserausführung) oder Druckerhöhung von Brauchwasser Basisausführung)
End-suction close-coupled pumps according to EN 733
Designed to dependably and efficiently deliver high flow rates at low to medium pressures, Grundfos
end-suction pumps are suitable for a variety of applications.
Manufactured in ISO 9001 certified facilities, today’s range comprises a complete series of close-coupled
(NB family) and long-coupled (NK family) pumps compliant with DIN EN733 or ISO2858.
End-suction close-coupled pumps according to ISO 2858
Designed to dependably and efficiently deliver high flow rates at low to medium pressures, Grundfos
end-suction pumps are suitable for a variety of applications.
Manufactured in ISO 9001 certified facilities, today’s range comprises a complete series of close-coupled
(NB family) and long-coupled (NK family) pumps compliant with DIN EN733 or ISO2858.
The SE range of pumps is built for years of trouble-free operation. The SE range can operate submerged or dry-installed without motor cooling, and is extremely reliable and very easy to service. The pumps can be permanently installed using an auto-coupling guide-rail system or a fixed pipe connection; the pumps are also suitable for freestanding installation or for use as portable utility pumps.
High motor efficiency for substantial energy and cost savings.
Intelligent adaptive controls ensure reliable operation with low energy consumption.
Integrated analogue sensors offer complete monitoring of pump condition.
Lifting handle designed for optimum point-of-balance and correct lifting.
Smooth, easy-to-clean surface is extremely robust and impact-resistant.
One cable to the pump, simplifying pump installation, commissioning and maintenance.
Moisture-proof connector plug ensures that liquid cannot penetrate into the motor.
Patented SmartSeal auto-coupling gasket provides a completely leak-proof connection.
Easy-to-open clamp for the quick and easy disassembly of pump from motor unit.
Double mechanical shaft seal ensures longer operation time with less downtime.
Short rotor shaft reduces vibrations to protect shaft seals and bearings.
Liquidless motor cooling for continuous operation, even in dry installations.
Choice of SuperVortex or S-tube impeller.
Replaceable wear ring to return the pump to full efficiency.
The SE pumps are available with SuperVortex impellers (SEV) for applications with required low operating hours, dry matter content up to 5 %, and a spherical free passage up to 100 mm, or with the S-tube impeller (SE1) for applications with required high operating hours, dry matter content up to 3 %, and a spherical free passage up to 100 mm.
The S-tube impeller is the only impeller on the market designed to cope with the challenges of modern wastewater with varying dry matter content. The simple and robust design of the S-tube impeller offers world class hydraulic efficiency without compromising free passage.
Grundfos EF pumps are designed for pumping wastewater (excluding toilet waste) from private dwellings. They are also suitable for pumping liquid manure from farms, and for a variety of industrial applications.
The EF pumps are designed for free-standing, hook-up or auto-coupling installation. The pumps are fitted with an integrated three-legged stand. They are capable of handling liquids containing solids of up to 30 mm in size.
The SEG range of grinder pumps from Grundfos is specifically designed for pumping effluent and untreated sewage in small communities or sparsely populated areas with no sewer systems or where gravitation systems are unsuitable.
The new SEG AUTOADAPT pumps have proven very popular from the
moment of being launched. Clients point to how the new range
eliminates problems with external sensors in pumping stations and
facilitates intelligent operation – and now that the pumps are being
installed in new projects by the hundreds, end-users look forward to
seeing the new SEG pump’s advantages translate into real benefits
in the years to come.
The KPL axial-flow propeller pump is designed for high flow at low head.
With a flow capacity of up to 700 m3/min at a head of up to 9 m, the Grundfos KPL axial-flow propeller pump is ideal for flood control as well as other applications where large volumes of water are to be moved.
Each KPL pump is individually engineered to suit your requirements, ensuring cost-efficient performance. For optimum results, contact Grundfos during your planning stages; that allows us to consider aspects such as pumping station design, pump selection, future requirements, and the total life cycle costs.
